About me

Davis Howard

Davis Howard is a leading expert in LED and lighting energy based in the USA. With a wealth of experience and a passion for energy-efficient solutions, Davis has established himself as a key voice in the industry. He has a deep understanding of the latest trends and technologies in LED lighting, and is known for providing practical and innovative solutions to businesses and individuals looking to reduce their energy consumption. In addition to his work in the field, Davis is also the author of the popular blog ScottRobertLadd.net, where he shares his insights and expertise on all things related to LED and lighting energy. With a commitment to promoting sustainable energy practices and helping others to make a positive impact, Davis Howard is a highly respected figure in the LED and lighting energy community.

How To Recover Lamp Shades

Recovering lamp shades is a great way to give an old lamp a new life. It can be a fun and creative project that can help you save money and add a unique touch to your home décor. There are a few simple steps you need to follow in order to successfully recover a lamp shade. 

First, you need to decide on the fabric you will use to cover the shade. You can choose from a variety of fabrics such as silk, linen, velvet, or even a patterned fabric. Then, you will need to measure and cut the fabric. Make sure that the fabric is the right size and shape for the shade. 

Next, you will need to remove the old fabric and glue from the shade. You may need to use a small putty knife or a razor blade to scrape off the old glue. Be careful not to damage the shade while doing so. 

Once the old fabric and glue have been removed, you can start to attach the new fabric. Start by stapling the fabric to the inside of the shade. Make sure that the fabric is tight and secure, and that there are no wrinkles or gaps. You may need to use an iron to smooth out any

How To Recover Lamp Shades

Recovering lamp shades is a great way to add a personal touch to your home decor. To start, you will need to remove the existing fabric from the lamp shade. You can do this by carefully cutting it away from the frame and taking off any trim. Once the fabric is removed, make sure to clean the frame and any trim before proceeding with the recovery. Next, cut the new fabric to fit the frame and any trim. Attach the fabric to the frame with a staple gun. Lastly, reattach any trim and replace the lamp shade back on the lamp. With a few simple steps, you can give your lamp shades a new look and make them a great addition to any room in your home.

See also  Gorgeous Mineral Oil Rain Lamp - Create a Magical Ambiance!

Gather Supplies for Cleaning and Repair

Recovering lamp shades can be a daunting task, but with the right supplies and a bit of know-how, you can bring your beloved shades back to life. Whether they are vintage or modern, faded or frayed, there are a few key items that can help you revive your lamp shades and make them look as good as new.

Before you get started, it is important to gather all of the materials and tools you need for the job. It is best to have everything on hand before you begin, so you are not running around trying to find the right supplies halfway through the project.

How To Recover Lamp Shades

First, you will need to get some fabric for the shade. Depending on the style and size of your lamp shade, you may need to purchase fabric from a fabric store or online. You can also use old drapes, sheets, or clothing, depending on the look you are going for. Make sure the fabric is washable and durable, as it will need to withstand the heat of the lamp.

Next, you will need some thread, scissors, and a needle or sewing machine. Make sure the thread is a color that matches the fabric you choose. If you are using a sewing machine, make sure you have the right attachments and needles. If you are hand-sewing, make sure you have enough thread to finish the job.

Finally, you will need a supply of glue, tape, and pins. These will help you secure the fabric to the shade, and can help you make sure that the edges stay in place and the fabric is secure.

With all of these supplies on hand, you can start the process of recovering your lamp shades. With a bit of patience and a steady hand, you can give your lamp shades a new lease on life and enjoy the beauty and elegance of your newly recovered shades.

Pre-clean the Shade

Are you looking for a way to spruce up a tired, old lamp shade? If so, precleaning the shade is an important first step that will make the entire project much easier. Precleaning the shade may seem like a daunting task, but it doesn’t have to be! Here are some simple steps to help you get started.

See also  Easy Steps: How To Install Outdoor Light Fixture Box

Before you begin, make sure you have the right materials for the job. A brush or vacuum, some gentle detergent, a soft cloth, and a bit of elbow grease are all you need.

Start by vacuuming the shade. This will help remove any dust, allergens, and other debris that may have settled on the shade over time. Once the shade is vacuumed, use a soft cloth and some gentle detergent to wipe the shade down. This will help remove any oils or dirt that may have accumulated on the shade. Be sure to use a light touch and avoid scrubbing too hard as this could damage the shade.

Once you’ve wiped the shade down, you can use a brush to remove any stubborn dirt or dust. Make sure to use a soft brush and a gentle touch to avoid damaging the shade.

How To Recover Lamp Shades

Finally, rinse the shade with a damp cloth. This will help remove any detergent residue that may have been left behind. Once you’re done, you can let the shade air dry.

Precleaning the shade is an important first step when it comes to restoring a tired, old lamp shade. This simple process will make the entire project much easier and will help ensure that you get the best results possible. So don’t put it off any longer – get started on precleaning your shade today!

Repair any Tears or Rips

When it comes to our home decor, the last thing we want is for a tear or rip to appear in our lamp shades. Whether it’s from heavy use or a pet accident, tears and rips can make your lamp shades look old and drab. Fortunately, with a few simple tips and tricks, it’s easy to repair any tears or rips and restore your lamp shades to their former glory.

First and foremost, you should assess the damage. Is the rip or tear in the fabric or in the structure of the shade? If it’s in the fabric, you’ll need to patch it up with an adhesive. If it’s in the structure, you’ll need to reinforce it with something like an adhesive or a piece of duct tape.

See also  FDA Approves LED Light Therapy Devices!

Once you’ve identified the damage, you can begin the repair process. If it’s a fabric tear, you’ll need to cut a piece of fabric that’s slightly larger than the tear. Next, use an adhesive to secure the patch in place. It’s important to make sure the patch is secure and that it lines up with the existing fabric.

If the tear is in the structure, you’ll need to reinforce it with an adhesive, such as super glue. Apply the glue to the underside of the rip and then press the two sides together. You should then use a piece of duct tape to hold the two sides together. Make sure the tape is secure and that it lines up with the existing fabric.

Finally, you’ll want to finish off the repair job by reattaching the lamp shade to the base. It’s important to make sure the shade is secure and that the seam is tight. Once the shade is reattached, you can enjoy your newly restored lamp shade.

By following these steps, you’ll be able to easily repair any tears or rips in your lamp shades. With a little bit of time and patience, you’ll be able to restore your lamp shades to their former glory.



If your home is in dire need of a lamp shade makeover, don’t despair! You can easily and inexpensively recover lamp shades to give them new life. All you need is some fabric, a hot glue gun, and a little bit of time. First, remove the old fabric from the shade (if there is any) and then measure the circumference and height of the shade. Cut your new fabric to size, allowing for a half-inch seam allowance all the way around. Next, hot glue the fabric to the inside of the shade, starting at the top and working your way down. Once the shade is completely covered, trim away any excess fabric and voila! You’ve got a brand new lamp shade.